dependent. because this set of numbers is dependent on what is put into the data table.
1 answer
1> Delivery
2> Accuracy
3>Timeliness
4> Jitter
1 answer
The damaged sprocket holes in the film, caused the picture to jitter.
1 answer
The question probably refers to a copper digital interface against an optical interface. The copper interface carries electrical signals while the optical interface uses light pulses to carry the signal. The quality of either of them is dependent entirely on the quality of data that is fed to the interface. A copper cable or an optical fiber carrying the same data will deliver identical signals at the far end. At high data rates fiber can generally carry a signal a longer distance than copper but at audio rates, this is not the case. There are a few audiophiles who claim that copper cables can cause "jitter". This is a minor instability in signal timing and in extreme cases it can result in lost data. Their claim is that jitter causes audible distortion although there is little evidence to support the claim. Almost all equipment use techniques to eliminate the effects of jitter. It is also the case that optical fiber links suffer from the same jitter. Although this answer is not intended to fuel the debate about jitter distortion, one should be careful about how much weight is given to the "jitter causes distortion" argument. Therefore, when selecting a transmission method, the most convenient link should be selected. If both source and receiver have optical links, use optical by all means. If both have a copper digital link, that will operate just as well.
1 answer
It will not work with Jitter bug cell phones!
1 answer
Bitter, fitter, hitter, jitter, litter, knitter, sitter, titter,
bitter, fitter, jitter
1 answer
Delay jitter is caused by queuing, contention and sterilization effects on the path through the network.
1 answer
Words that rhyme with jitter include chitter, twitter, sitter and critter. Also the words bitter and litter.
1 answer
x - independent, y is dependent
1 answer
Two random samples are dependent if each data value in one sample can be paired with a corresponding data value in the other sample.
1 answer
there is a matching of the first sample data drawn and a corresponding data value in the second sample data.
1 answer
Two random samples are dependent if each data value in one sample can be paired with a corresponding data value in the other sample.
1 answer
means data is not dependent on the other data.
why? because it makes easier for you
1 answer
form phase noise to jitter integrate ftom the carier up to some point (I dont exactly know which)
1 answer
Many surprising medications can cause one to jitter, especially extra strength aspirin which thins the blood and often contains caffeine. Cold and sinus medications can also cause one to jitter, especially if taken on an empty stomach.
1 answer
(as opposed to jitters, the term jitter applies to electronic or signal interference)
"The jitter in the signal made it impossible to decode the message."
2 answers
Data that can not be controlled are placed on the vertical y-axis. These data are also called the dependent variables in an experiment.
1 answer
Data gathering in two different samples such that there is matching of the first sample data drawn and a corresponding data value in the second sample.
1 answer
A title an independent variable a dependent variable and data
1 answer
If you have 2 sets of data, one that is independent and one that is dependent (I will assume this because relating two sets of unrelated data is useless), then you plot the independent on the x and the dependent on the y and assess how y changes in relation to x
1 answer
Dependent variable is your data, independent variable is what you are testing. Ex. Sunlight would be the independent variable and a plants growth would be the dependent variable.
1 answer
Packet Jitter is the variation in the delay of received packets. At the sender they are sent evenly spaced intervals, but due to traffic congestion, improper queuing or configuration errors they come at unequal intervals.
1 answer
Data tabel
1 answer
scatter diagram
1 answer
The y-Variable
1 answer
scatter diagram
1 answer
Some characteristics of an Advanced Symmetric Block Cipher are key dependent S-boxes, data dependent rotation, variable plaintext or ciphertext block length, and operations on both plain and ciphered data.
1 answer
You can not change the range of a data type. It is a function of the implementation and is dependent on the word size of the implementation's computer hardware.
1 answer
when a sets of data can be separated by 2 orders of variables, which are the independent & dependent variables.
2 answers